English
Bahasa Melayu
Suomen kieli
عربي 
Português
Français
Pусский
Español
How does the remote signaling contact on a Type 2 DC SPD work?
If you have seen “remote signaling contact” on a Type 2 DC SPD datasheet or on the SPD enclosure itself, you may be unsure what it actually does. In short: it is a dry-contact output
• Solar Panels.
• DC combiner box 2/2.
• INVERTER
• BATTERY
• Accessories
| 5-10KW Single-phase energy storage system | ||||||
| MODEL | QUANTITY | UNIIT | MPPT / INTERFACE | |||
| 5KW | 10KW | 5KW | 10KW | 5/10KW | 15/20KW | |
| Component | single crystal 415W | single crystal 415W | 13 | 25KW | piece | / |
| DC String box | 2 in 2 out / (DC1000V) | 1 | set | / | ||
| Battery Storage Inverter | SPH5000TL BL-UP(5KW) | GW10K-ET(10KW) | 1 | set | 2/1+1 | |
| AC distribution box | / | 1 | set | / | ||
| Battery protection box | / | 1 | set | / | ||
| Connecto | MC4 | 2 | set | / | ||
| DC cable | PV1-F4 | 100 | meter | / | ||
| Battery connection cable | BVR- | 10 | meter | / | ||
| AC cable | YJV22- | 100 | meter | / | ||
| Mounting Brackets | / | 1 | set | / | ||
| Battery pack | 48V/5KWH | 1 | set | / | ||
| Installation tool | / | 1 | set | / | ||
GET A QUOTE