Solar Connector Y-Type 2-1

Solar Connector Y-Type 2-1

• IP65 Waterproof

• Simple on-site processing

• PPO high strength material

• High quality waterproof ring

• High current carrying capacity

• Ambient temperature -45℃+110℃

• Insulation material to prevent electric shoock

• Mating safety provided bykeyed housings

 

 

ELECTRICAL TECHNICAL REFERENCE

Rated current 30A
Rated voltage 1000VDC
Test voltage 6000V (50Hz, 1min)
Overvoltage category/Pollution degree CATⅢ/2
Contact resistance of plug connectors ≤0.5mΩ
Contact material Copper, Ag plated
Insulation material PPO
Degree of protection IP2*/IP65
Plame class UL94-VO
Safety class Ⅱ
Suitable cable 2.5mm²~6.0mm²
Insertion Withdrawal force ≤50N
Cable length 8cm
Temperature range -40℃~+110℃

 

 

Recommended Products

Recommended News

How to troubleshoot a solar string with no output while the PV fuse remains intact

How to troubleshoot a solar string with no output while the PV fuse remains intact

You open the combiner box, pull the PV fuse, and put the multimeter on continuity. It beeps. The fuse is good. You reinstall it, close the disconnect, and the string current is still
Type 2 DC SPD

How does the remote signaling contact on a Type 2 DC SPD work?

If you have seen “remote signaling contact” on a Type 2 DC SPD datasheet or on the SPD enclosure itself, you may be unsure what it actually does. In short: it is a dry-contact output

GET A QUOTE

GET IN TOUCH NOW
Captcha Code
×
We value your privacy
We use cookies to provide you with a better online experience, analyse and measure website usage, and assist in our marketing efforts.
Accept All