Quick Details

  • Place of Origin: Zhejiang, China (Mainland)
  • Brand Name: SUNTREE
  • Model Number: SMC4-CMMM-14 MC4 pv y type connector
  • Type: Solar
  • Application: solar power MC4 pv y type connector
  • Gender: Male & Female MC4 pv y type connector
  • Rated current: 30A
  • Withstanding Voltage: 1000vdc of MC4 pv y type connector
  • Contact Resistance: ≤0.3mΩ
  • Protection class: Class II
  • Temperature Range: -40 C~+90C
  • Protection Degree: IP67 MC4 pv y type connector
  • Unmating Force: 200 Newton MC4 pv y type connector
  • Contact material: Copper,silver plated of MC4 pv y type connector

tuv T type/Y type MC4 connector and pv cable connector mc4

  • Simple on-site processing.
  • Acomodates PV cable with different insulation diameters.
  • Mating safety provided bykeyed housings.
  • Multiple plugging and unplugging cycles .
  • High current carrying capacity.
  • TUV and UL approved.

MC4 Multi-Contact Connectors 

Samlex's MC4-2 Kit contains 1 male and 1 female MC4 solar panel connector. tuv T type/Y type MC4 connector and pv cable connector mc4is easy to install and uses “snap in” safety locking tabs to lock two mating connectors, thereby avoiding unintentional disconnection. Also when tuv T type/Y type MC4 connector and pv cable connector mc4 locked, the mating contacts are sealed against ingress of dust and water. 

Specifications are as follows

tuv T type/Y type MC4 connector and pv cable connector mc4

•Connectors supplied with this kit are for use with wire size AWG # 10 or AWG # 12 with 

outer insulation diameter of 3 – 6 mm

•Contact diameter -4 mm

•Maximum rated current - 30 A

•Maximum system voltage - 1000 V

•Degree of ingress protection when connected and properly locked - IP67

•Temperature range 40°C to +90°C

•TUV Rheinland – type approved, UL listed.

Specifications

Type And meaning  
Rated current 30A
Rated voltage 1000V DC
Test voltage 6000v(50Hz,I min)
Overvoltage Category/pollution degree CAT Ⅱ/2
Contact resistance of plug connector Im Ω
Contact material copper,Tin-plated
Insulation material PA/PRO
Degree of protection IP2*/IP65
Flame class UL94-VO
Safety class
Insertion force ≤50N
withdrawal force ≥50N
Temperature range  -40℃~+110℃