• Product material: default 304, optional 316 and 316L seal is EPDM rubber
• Protection grade: within the specified bayonet range,with the seal ring, the protection grade can reach lP68
• Working temperature: test - 40°~105° parts to ensure no damage and normal operation of equipment
• Flame retardant grade: UL94V-2, customized vo
• Product performance: Multiple cables are locked andsealed at the same time, greatly saving space utilization
• Ordering lnstructions:
1. The default delivery does not include nuts. lf you need to purchase separately, please know
2. The default is 304 material. lf 316 is required, please changethe model suffix "- ss" to "S316"
3.The whole set includes: one set of gasket, main body, sealingring and nut;
4. The product price is (RMB: yuan/set, uSD: USD/set).
5. This product can be customized to any length. Please consult customer service for specific price.
SIX HOLES SIZE TABLE
| Product model | Thread size | Cable range | Thread length | Wrench Size |
| PN. | Metric | mm | mm | nut/cap mm |
| MG16-H6-02-SS | M16×1.5 | 1.2~2.1 | 9.5 | 20/21 |
| MG18-H6-02-SS | M18×1.5 | 1.2~2.1 | 9.5 | 21/21 |
| MG20-H6-04-SS | M20×1.5 | 2~4 | 12 | 24/26 |
| MG20-H6-03-SS | M20×1.5 | 1.5~3 | 12 | 24/26 |
| MG22-H6-04-SS | M22×1.5 | 2~4 | 12 | 26/26 |
| MG22-H6-03-SS | M22×1.5 | 1.5~3 | 12 | 26/26 |
| MG24-H6-04-SS | M24×1.5 | 2~4 | 10.5 | 28/26 |
| MG24-H6-03-SS | M24×1.5 | 1.5~3 | 10.5 | 28/26 |
| MG25-H6-05-SS | M25×1.5 | 3~5 | 12 | 30/31 |
| MG27-H6-05-SS | M27×1.5/2.0 | 3~5 | 12 | 30/31 |
| MG30-H6-05-SS | M30×1.5/2.0 | 3~5 | 12.5 | 34/40 |
| MG32-H6-07-SS | M32×1.5 | 5~7 | 12.5 | 38/40 |
| MG32-H6-05-SS | M32×1.5 | 3~5 | 12.5 | 38/40 |
| MG33-H6-07-SS | M33×2.0 | 5~7 | 14.5 | 38/40 |
| MG36-H6-07-SS | M36×1.5/2.0 | 5~7 | 13 | 42/40 |
| MG40-H6-10-SS | M40×1.5/2.0 | 7~10 | 14 | 48/50 |
| MG40-H6-08-SS | M40×1.5/2.0 | 6~8 | 14 | 48/50 |
| MG40S-H6-07-SS | M40×1.5 | 5~7 | 14 | 48/40 |
| MG40S-H6-05-SS | M40×1.5 | 3~5 | 14 | 48/40 |
| MG42-H6-10-SS | M42×2.0 | 7~10 | 15 | 48/50 |
| MG42-H6-08-SS | M42×2.0 | 6~8 | 15 | 48/50 |
| MG48-H6-10-SS | M48×2.0 | 7~10 | 15 | 58/50 |
| MG48-H6-08-SS | M48×2.0 | 6~8 | 15 | 58/50 |
| MG50-H6-12-SS | M50×1.5 | 9~12 | 15 | 58/60 |
| MG50S-H6-10-SS | M50×1.5 | 7~10 | 15 | 54/50 |
| MG50S-H4-08-SS | M50×1.5 | 6~8 | 15 | 54/50 |
| MG63-H6-12-SS | M63×1.5 | 9~12 | 15 | 71/76 |
TEN HOLE SIZE TABLE
| Product model | Thread size | Cable range | Thread length | Wrench Size |
| PN. | PG | mm | mm | nut/cap mm |
| PG11-H6-02-SS | PG11 | 1.2~2.1 | 9.5 | 21/21 |
| PG13.5-H6-03-SS | PG13.5 | 1.5~3 | 10.5 | 24/24 |
| PG16-H6-04-SS | PG16 | 2~4 | 12 | 26/26 |
| PG16-H6-03-SS | PG16 | 1.5~3 | 12 | 26/26 |
| PG19-H6-04-SS | PG19 | 2~4 | 10.5 | 28/26 |
| PG19-H6-03-SS | PG19 | 1.5~3 | 10.5 | 28/26 |
| PG21-H6-05-SS | PG21 | 3~5 | 12 | 32/31 |
| PG25-H6-05-SS | PG25 | 3~5 | 12.5 | 34/31 |
| PG29-H6-07-SS | PG29 | 5~7 | 12.5 | 40/40 |
| PG29-H6-05-SS | PG29 | 3~5 | 12.5 | 40/40 |
| PG36-H6-10-SS | PG36 | 7~10 | 15 | 58/50 |
| PG36-H6-08-SS | PG36 | 6~8 | 15 | 58/50 |
| PG48-H6-12-SS | PG48 | 9~12 | 15 | 71/65 |
| G3/8-H6-02-SS | G3/8 | 1.2~2.1 | 9.5 | 21/21 |
| G1/2-H6-04-SS | G1/2 | 2 ~ 4 | 12 | 24/26 |
| G1/2-H6-03-SS | G1/2 | 1.5~3 | 12 | 24/26 |
| G3/4-H6-05-SS | G3/4 | 3~5 | 12 | 30/31 |
| G1-H6-07-SS | G1 | 5~7 | 15 | 38/40 |
| G1-H6-05-SS | G1 | 3~5 | 15 | 38/40 |
| G1-1/4-H6-10-SS | G1-1/4 | 7~10 | 15 | 48/50 |
| G1-1/4-H6-08-SS | G1-1/4 | 6~8 | 15 | 48/50 |
| G1-1/2-H6-10-SS | G1-1/2 | 7~10 | 15 | 55/50 |
| G1-1/2-H6-08-SS | G1-1/2 | 6~8 | 15 | 55/50 |
| G2-H6-12-SS | G2 | 9~12 | 15 | 71/76 |
| NPT3/8-H6-02-SS | NPT3/8 | 1.2~2.1 | 10 | 21/21 |
| NPT1/2-H6-04-SS | NPT1/2 | 2~4 | 13 | 24/26 |
| NPT1/2-H6-03-SS | NPT1/2 | 1.5~3 | 13 | 24/26 |
| NPT3/4-H6-05-SS | NPT3/4 | 3~5 | 13 | 30/31 |
| NPT1-H6-07-SS | NPT1 | 5~7 | 15 | 38/40 |
| NPT1-H6-05-SS | NPT1 | 3~5 | 15 | 38/40 |
| NPT1-1/4-H6-10-SS | NPT1-1/4 | 7~10 | 15 | 48/50 |
| NPT1-1/4-H6-08-SS | NPT1-1/4 | 6~8 | 15 | 48/50 |
| NPT1-1/2-H6-10-SS | NPT1-1/2 | 7~10 | 15 | 55/60 |
| NPT1-1/2-H6-08-SS | NPT1-1/2 | 6~8 | 15 | 55/50 |
| NPT2-H6-12-SS | NPT2 | 9~12 | 15 | 71/76 |
GET A QUOTE
English
Bahasa Melayu
Suomen kieli
عربي 
Português
Français
Pусский
Español
