Momentary: Means that when you push switch and then move your finger, the actuator will back to the original position. Latching: Means that when you push switch once it will change state and stay in this pushed-down position and will not come back to original position unless you push it again.
Technical Data
| Type | S19-F | S19-F-R | S19-F-D | ||||
| Illuminated Options | Non-Illuminated | Ring | Dot | ||||
| Max. Panel Thickness: | 0.394" (10.0mm) | ||||||
| Terminal | Pin(2.8x0.5) | ||||||
| Max. Switch Rating | 5A/ 250VAC | ||||||
| Contact Resistance | ≤50mΩ | ||||||
| Insulation Resistance | ≥1000mΩ | ||||||
| Dielectric Strengh | 2000VAC | ||||||
| Operation Temp. | -20°C ~ +55°C | ||||||
| Mechanical Life | 1,000,000cycles | ||||||
| Electrical Life | >50,000cycles | ||||||
| Contact Material | Silver Alloy | ||||||
| Torque | 5 ~ 14Nm | ||||||
| Operation Pressure | 3 ~ 8N | ||||||
| Protection | IP65 | ||||||
| Material | Actuator | Stainless Steel/ Anodized Aluminum | |||||
| Body | Stainless Steel/ Anodized Aluminum | ||||||
| Base | PA | ||||||
| Color | Type | LED (ratings @ 20mA) | |||||
| Color | R-Red | Y- Yellow | O- Orange | G- Green | B- Blue | W- White | |
| Luminous Intensity (mcd) | 160 | 200 | 150 | 520 | 220 | 2000 | |
| Forward Volatge | 1.8~2.6 | 2.8~3.6 | |||||
| Illumination Voltage |
no suffix No resistor fitted. An appropriate resistor must be series connected by the user. Voltages as above. |
||||||
| 6V/ 12V/ 24V/ 36V/ 110V/ 230V | |||||||
| Life | Approx. 40, 000hours | ||||||
GET A QUOTE
