HD11N-63/4 Knife Switch

HD11N-63/4 Knife Switch

ADVANTAGES

PV

 

Meet the requirements of PV grid-connected box and improve the scope of application of the product.

 

 

50℃

 

Low temperature rise, no derating at 50℃.

 

 

20%

 

Small size, 20% smaller than other manufacturers, and reduced installation size.

 

 

Model and Meaning

 

Enables wiring without removing the top
cover and increases productivity.
Stainless steel double spring clamps
are used to improve reliability in use.
Adopt flame retardant DMC high
strength resin.
The handle's anti-touch design reduces
the exposure of the copper piece.

 

 

Application

 

HD11N series knife switch, suitable for AC 50Hz 400/500/690V, rated service current up to 200A, for PV grid-connected box and other complete sets of power distribution equipment, as a power and load isolation switch, and with visual contact position and disconnection point, to ensure the circuit and equipment maintenance and operator safety use.

 

 

Model and Meaning

 

 

 

Standards compliant

 

GB/T 14048.3-2017: Low-voltage switchgear and controlgear-Part 3: Switches, disconnectors,

                                    switch-disconnectors and fuse-combination units.

GB/T 20645-2021: Specific environmental condition-Technical requirements of low-voltage apparatuses for plateau

 

 

Technical parameters

 

Conventional thermal current Ith(A) 63
Rated service current (Ie) (A) 16A, 20A, 25A, 32A,
40A, 50A, 63A
Rated service voltage Ue(V) 400V/500V/690V
Rated insulation voltage Ui (V) 1000
Rated impulse withstand voltage (KV) 8
1S short time withstand current (KA) 1.2
Utilization category AC-20B
Rated duty Long term service

 

 

Temperature rises of terminal

 

Rated current 2m wire cross-sectional area mm² Temperature rises of terminals k
50 10 <35
63 16 <45

 

 

25KW grid-connected cable

 

 

 

Application

 

Message

Related Products

News information